Pentax CMG 80-250A High head High flow centrifugal pump

  CMG 80-250A Centrifugal pump 415v 50Hz 55Kw Flow of up to 4000 Litres Per Minute Maximum Head of up to 90 Metres Head Maximum 100mm 4" BSP Female Outlet 80mm 3" BSP Female Inlet Liquid temperature -10 to 90 Degrees Examples of use - heating and air conditioning systems, water supply and irrigation

Nocchi Starite Pentair DHI Centrifugal Multistage Pumps 230v & 400v

GMP Fuel Oil Red High Volume Diesel Transfer Pumps

GMP Electric Driven Self Priming High Head Pumps

GMP Centrifugal Self Priming Pumps

Nocchi Starite Pentair Multinox VE+ Vertical Multistage Pumps

.

Pentair Multi Evo Horizontal Multistage Pumps 230v & 400v

Gear 3600GM-GE393 Single Phase

Port - 1 1/4" H x W x L - 210 x 170 x 525 LM/HM - 65/100 kW - 1.8 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 2000GM-GE27 Single Phase

Port - 1" H x W x L - 210 x 170 x 465 LM/HM - 33/100 kW - 1.1 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 3000GM-GE33 Single Phase

Port - 1" H x W x L - 210 x 170 x 525 LM/HM - 50/100 kW - 1.5 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 1000GM-GE15 Single Phase

Port - 3/4" H x W x L - 210 x 170 x 450 LM/HM - 16/100 kW - 0.55 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 1500GM-GE21 Single Phase

Port - 3/4" H x W x L - 210 x 170 x 460 LM/HM - 25/100 kW - 0.75 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 300GM-GE03 Single Phase

Port - 1/2" H x W x L - 210 x 170 x 390 LM/HM - 5/100 kW - 0.26 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 600GM-GE09 Single Phase

Port - 3/4" H x W x L - 210 x 170 x 410 LM/HM - 10/100 kW - 0.37 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.