Mono M Range Progressive Cavity Pumps

Pentair PVM 10 Vertical Multistage Pumps

.

Pentair PVM 5 Vertical Multistage Pumps

.

Pentair Multi Evo Horizontal Multistage Pumps 230v & 400v

Pentax MPX Self Priming Multistage Centrifugal Pumps

** NO LONGER AVAILABLE **Pentair Jet Self Priming Cast Iron Centrifugal Pumps

 ** NO LONGER AVAILABLE ** Model Power(kW) Inlet/Outlet size Max FlowLitres/min Max Head(m) Weight(Kg) JET1000M 230v 1.0 1” x 1" 70 50 18 JET1000M 110v 1.02 1" x 1" 70 50 18 JET1000T 400v 1.0 1” x 1" 60 52 17 JET100-68M 230v 1.5 1½" x 1" 100 68 29 JET100-68T 400v 1.5 1½" x 1" 100 68 29 JET100-80T 400v 2.2 1½" x 1" 100 80 30    

Pentax CP Peripheral Pumps Side Suction

  Model Power(kW) Outlet size Max FlowLitres/min Max Head(m) Weight(Kg) CP/T45 0.37 1” 40 40 5.6 CP/T75 0.74 1” 50 65 9.5    

Pentax WRAS Approved Surface Multistage Pumps

.

Gear 3000GM-GE33 Single Phase

Port - 1" H x W x L - 210 x 170 x 525 LM/HM - 50/100 kW - 1.5 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Gear 300GM-GE03 Single Phase

Port - 1/2" H x W x L - 210 x 170 x 390 LM/HM - 5/100 kW - 0.26 Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Declared performances have been obtained pumping liquids with a viscosity of 8° Engler. Maximum viscosity for the gear pumps is up to 10° Engler. For higher viscosities of more than 10° Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140°C. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particles - hydraulic oil, vegetable oil, diesel fuel oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them. Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.

Nocchi Starite Pentair VLR8 Series

111

Nocchi Starite Pentair VLR4 Series

Pentax CM40 Range of End Suction Centrifugal Pumps

CM40 Range of End Suction Centrifugal Pumps Centrifugal Impeller 415v 50Hz 1.5-15Kw Flows of 800 Litres Per Minute Maximum Heads of 90 Metres Head Maximum 40mm 1½" BSP Female Outlet 65mm 2½" BSP Female Inlet Liquid temperature -10 to 90 Degrees Examples of use - heating and air conditioning systems, water supply and irrigation Full data on PDF datasheet

Pentax CM32 Range of End Suction Centrifugal Pumps

CM32 Range of End Suction Centrifugal Pumps Centrifugal Impeller 415v 50Hz 1.5-15Kw Flows of 600 Litres Per Minute Maximum Heads of 92 Metres Head Maximum 32mm 1¼" BSP Female Outlet 50mm 2" BSP Female Inlet Liquid temperature -10 to 90 Degrees Examples of use - heating and air conditioning systems, water supply and irrigation Full data on PDF datasheet